| Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Specialty Chemicals, Pharmaceutical Excipients, Food & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE Dubai, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Malaysia, Indonesia, Thailand, Korea, Japan, etc. Halal & Kosher certified Potassium Bromate Manufacturers made in a FDA-GMP GLP plant is offered. |
| The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal and DMF support is available. |
---------- 
Potassium Bromate SDS MSDS Sheet of Manufacturers
Specifications of Potassium Bromate Manufacturers
Potassium Bromate SDS MSDS Sheet, Material Safety Data Sheet
1. Product Identification
Product: Potassium Bromate.
CAS No.: 7758-01-2
EINECS EC No.: 231-829-8
Molecular Weight: 167.00
Chemical Formula: KBrO3
Recommended usage: Industrial Manufacturing.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Oxidizing liquids; Oxidizing solids Category 1 - H271
Acute toxicity, oral Category 3 - H301
Carcinogenicity Category 1B - H350
Labeling according GHS & Regulation (EC) No 1272/2008
GHS Label Elements  Oxidizing Solid |
GHS Label Elements |
GHS Label Elements |
Signal Words: Danger
Hazard statements:
H271: May cause fire or explosion; strong oxidiser.
H301: Toxic if swallowed.
H350: May cause cancer.
Precautionary statements:
P201: Obtain special instructions before use.
P210: Keep away from heat/sparks/open flames/hot surfaces – No smoking.
P220: Keep/Store away from clothing/…/combustible materials.
P221: Take any precaution to avoid mixing with combustibles.
P264: Wash … thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P330: Rinse mouth.
P308 + P313: IF exposed or concerned: Get medical advice/ attention.
P370+378: In case of fire: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide for extinction.
P301+310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
P391: Collect spillage.
P405: Store locked up.
P501: Dispose of contents/container to authorized agents only.
Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbols: T O Xn Harmful
Risk Phrases: R25, R8, R45.
3. Composition/Information on Ingredients
Product: Potassium Bromate.
CAS No.: 7758-01-2
EINECS EC No.: 231-829-8
4. First Aid Measures
Always get medical attention after the first aid is over.
Inhalation: If inhaled, remove to fresh air. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If this material are swallowed, call a physician immediately. Loosen tight clothing. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.
5. Fire Fighting Measures
Fire: Not combustible, but substance is a strong oxidizer and its heat of reaction with reducing agents or combustibles may cause ignition.
Explosion: May explode when shocked, exposed to heat or flame, or by spontaneous chemical reaction. Sealed containers may rupture when heated. Sensitive to mechanical impact.
Fire Extinguishing Media: Dry chemical, carbon dioxide, Halo, water spray, or fog. If water is used, apply from as far a distance as possible. Water spray may be used to keep fire exposed containers cool. Do not allow water runoff to enter sewers or waterways. Use flooding quantities of water as spray. Cool containers with flooding quantities of water until well after fire is out.
Special Information: Wear full protective clothing and breathing equipment for high-intensity fire or potential explosion conditions. This oxidizing material can increase the flammability of adjacent combustible materials.
Special hazards arising from the substance or mixture: Hydrogen bromide gas, Potassium oxides.
6. Accidental Release Measures
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container.
Large Spill: Oxidizing material. Stop leak if without risk. Avoid contact with a combustible material (wood, paper, oil, clothing...). Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. Keep the substance damp using water spray. Do not touch spilled material. Prevent entry into sewers, basements or confined areas; dike if needed. Call for assistance on disposal.
7. Handling and Storage
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage and moisture. Isolate from any source of heat or ignition. Avoid storage on wood floors. Separate from incompatibles, combustibles, organic or other readily oxidizable materials. Containers may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
Precautions for safe handling: Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Provide appropriate exhaust ventilation at places where dust is formed. Keep away from sources of ignition - No smoking. Keep away from heat and sources of ignition.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: TWA 0.1 mg/m3 USA, Workplace Environmental Exposure Levels (WEEL).
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
9. Physical and Chemical Properties
Appearance: Off-white crystals or powder.
Odor: Odorless.
Solubility: Soluble in water
Specific Gravity: 3.2
pH: 5 - 9
Molecular Weight: 167.00
Chemical Formula: KBrO3
% Volatile by volume @ 21C (70F): 0
Boiling Point: Decomposes
Melting Point: 350C
10. Stability and Reactivity
Stability: Stable under ordinary conditions of use and storage. It is hygroscopic and must be packed well.
Hazardous Decomposition Products: Bromine or hydrogen bromide and toxic metal fumes may form when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Avoid all strong reducing agents, powdered metals, strong acids.
Conditions to Avoid: Heat, flames, organic materials, ignition sources and incompatibles.
11. Toxicological Information
Acute toxicity: LD50 Oral - Rat - 157 mg/kg
Carcinogenicity: This product is or contains a component that has been reported to be probably carcinogenic based on its IARC, OSHA, ACGIH, NTP, or EPA classification. Possible human carcinogen.
12. Ecological Information
Toxicity to fish LC50: Not available
Environmental Toxicity: Toxic to aquatic organisms.
Persistence and degradability: No data available
Bioaccumulative potential: No data available
Mobility in soil: No data available
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be handled as hazardous waste and sent to a RCRA approved waste facility. Processing, use or contamination of this product may change the waste management options. Dispose of container and unused contents in accordance legal requirements.
14. Transport Information
Domestic (Land, D.O.T.)
Proper Shipping Name: POTASSIUM BROMATE
Hazard Class: 5.1 Oxidizing material.
UN/NA: UN1484
Packing Group: II
International (Water, I.M.O.)
Proper Shipping Name: POTASSIUM BROMATE
Hazard Class: 5.1 Oxidizing material.
UN/NA: UN1484
Packing Group: II
International (Air, I.C.A.O.)
Proper Shipping Name: POTASSIUM BROMATE
Hazard Class: 5.1 Oxidizing material.
UN/NA: UN1484
Packing Group: II
15. Regulatory Information
USA:
Not available
16. Other Information
T = Toxic, O = Oxidizer, Xn Harmful
R45 May cause cancer
R 25 = Toxic if swallowed.
R 8 = Contact with combustible material may cause fire.
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************
Potassium Bromate Manufacturers
Aadhunik Industries
Ankleshwar Gujarat &, Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.
e-mail: info@aadhunikindustries.com
Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Vietnam, Korea, Japan, etc.
Copyright and Usual Disclaimer is Applicable January 13, 2022